Quick Find

LOD 1996-2006 Jeep TJ/LJ 44 Front Bumper   $159.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ 44 Front Bumper

LOD 1996-2006 Jeep TJ/LJ 44 Front Bumper

The LoD 44" Front Bumper is designed to bolt directly to the front of your Jeep with no drilling required. It constructed from 10 gauge 2"x4" box tube steel. The bumper comes standard with two light mounting, two fully welded shackle mounts, and semi-gloss black powder coating. Available as an option is a 2" hitch receiver welded to the bottom side.

More Info...

LOD 1996-2006 Jeep TJ/LJ 44in Front Winch Bumper   $329.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ 44in Front Winch Bumper

LOD 1996-2006 Jeep TJ/LJ 44in Front Winch Bumper

The LoD 44" front winch bumper offers a 'shorty' style front bumper with an integrated winch plate. The bumper comes standard with two shackle mounts as well two auxiliary light mounting tabs. The bumper comes standard with semi-gloss black powder coating.

More Info...

LOD 1996-2006 Jeep TJ/LJ 54 Front Bumper   $159.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ 54 Front Bumper

LOD 1996-2006 Jeep TJ/LJ 54 Front Bumper

The LoD 54" Front Bumper is designed to bolt directly to the front of your Jeep with no drilling required. It constructed from 10 gauge 2"x4" box tube steel. The bumper comes standard with two light mounting, two fully welded shackle mounts, and semi-gloss black powder coating. Available as an option is a 2" hitch receiver welded to the bottom side.

More Info...

LOD 1996-2006 Jeep TJ/LJ 54in Front Winch Bumper   $329.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ 54in Front Winch Bumper

LOD 1996-2006 Jeep TJ/LJ 54in Front Winch Bumper

The LoD 54" front winch bumper offers a 54" front bumper with an integrated winch plate. The bumper comes standard with two shackle mounts as well two auxiliary light mounting tabs. The bumper comes standard with semi-gloss black powder coating. You may add a 2" receiver to this bumper by selecting the option below. 

More Info...

LOD 1996-2006 Jeep TJ/LJ Frame Tie-in Brackets   $32.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ Frame Tie-in Brackets

LOD 1996-2006 Jeep TJ/LJ Frame Tie-in Brackets

Add these to your Xpedition Series rear tire carrier for even more added strength. These frame tie-in brackets are used to tie the Xpedition Series rear bumper directly into the frame rails. Without these brackets the bumper is bolted to the rear cross-member. We highly recommend the addition of these brackets when upgrading to the Xpedition Series Tire Carrier due to the amount of potential weight that may be added.

More Info...

LOD 1996-2006 Jeep TJ/LJ Xpedition Series Bumper/Tire Carrier   $599.00

LOD 1996-2006 Jeep TJ/LJ Xpedition Series Bumper/Tire Carrier

LOD 1996-2006 Jeep TJ/LJ Xpedition Series Bumper/Tire Carrier

The Xpedition Series Bumper with Tire Carrier is made out of 3/16" thick steel tube. It comes standard with 2 D-Ring mounts, a Hi-Lift Jack mount, greasable hinge assembly, tapered ends and an integrated hitch. The Xpedition Series Bumper is 58" long (as opposed to 54"), a HUGE 1-1/2" hinge pin (as opposed to 1-1/4"), 10 bolt points (as opposed to 6), an adjustable lever clamp latch, adjustable tail gate rubber isolator, optional Jerry Can mounts, optional trail rack and a pair of optional frame rail tie-in brackets that can be purchased separately for added strength. Note:Optional Items can be added at any time. The optional frame rail tie-in brackets that can be purchased separately for added strength will tie the bumper into the frame in more locations. With the LoD Xpedition Series Bumper/Tire Carrier, you now can have the rear end protection you need along with the capability to carry more fuel and gear. 

More Info...

LOD 1996-2006 Jeep TJ/LJ Xtreme Duty Rear Bumper   $189.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ Xtreme Duty Rear Bumper

LOD 1996-2006 Jeep TJ/LJ Xtreme Duty Rear Bumper

The LoD Extreme Duty Rear Bumper is constructed of 3/16" steel. The extreme duty features an integrated hitch fully welded through the bumper. This bumper also comes standard with two clevis mounts and a texture black powder coat finish.

More Info...

LOD 1996-2006 Jeep TJ/LJ Xtreme Duty Tire Carrier   $499.00
Add Multi

LOD 1996-2006 Jeep TJ/LJ Xtreme Duty Tire Carrier

LOD 1996-2006 Jeep TJ/LJ Xtreme Duty Tire Carrier

These bumpers are built to withstand the harshest conditions that today's off-road enthusiasts expect. This bumper/tire-carrier features 3/16" thick steel, a 1-1/4" greasable hinge pin fully welded into the bottom bumper and an innovative heavy-duty self-latching slam latch with a stainless steel 5/8” steel locking pin. The bumper comes equipped with two (2) CNC laser cut clevis mounts that are fully welded to withstand the off-road punishment. The A-Frame tire carrier is fully adjustable to accommodate wheels with different backspacing. Includes a Hi-Lift Jack mount. The LoD Xtreme bumpers come with a 2” Receiver integrated into the center of the bumper with gussets welded to the back for extra bracing and trailer safety chains. These bumpers are powder coated a light texture black for a long lasting, durable finish. 

More Info...

LOD 1996-2006 TJ/LJ Bolt-on Nose Guard   $89.00
Add Multi

LOD 1996-2006 TJ/LJ Bolt-on Nose Guard

LOD 1996-2006 TJ/LJ Bolt-on Nose Guard

The LoD Bolt-on Nose Guard is designed to bolt to any of the LoD front bumpers. The guard adds both protection and style to the front of your Jeep. This guard will bolt to the factory bumper as well. It comes standard with semi-gloss black powder coating.

More Info...

LOD 2007-2015 Jeep JK 4 Door Sliding Roof Rack   $1,499.00
Add Multi

LOD 2007-2015 Jeep JK 4 Door Sliding Roof Rack

LOD 2007-2015 Jeep JK 4 Door Sliding Roof Rack

The Patent Pending LoD Jeep JK Easy Access Sliding Roof Rack is finally here. The Patent Pending Roof Rack system allows the user to easily unlatch and slide the Roof Rack back out of the way with up to 300 lbs of gear on it order to access the soft top of the Jeep and put it up and down. It also allows easy access to the Freedom Panels on the hard top!

The rack will support 300 lbs in the fully open position so there is no need to remove your gear in order to access your soft or hard top! So unlike all of the other racks on the market where you must first unload your gear, and then unbolt, and tilt your roof rack back just to access the soft top and then repeat the whole time consuming process in reverse just to put your top up or down or to remove the hard top freedom panels!

The LoD Easy Access Sliding Roof Rack is rated to carry 300 lbs while driving and it is rated to hold 600 lbs the closed static position or basically while the Jeep is not moving or at rest.

The rear mounts of the LoD Roof Rack are included in the patent pending and are a very clever design. The mounts, mount behind the tail light, and require the user to drill 5 holes in order to install them. You say you don’t want to drill holes that you can see in the body of your new Jeep? No problem, if you remove the rear brackets and reinstall the tail lights, they will completely cover the holes that are required and you can’t tell that the body was ever even drilled!

The Roof Racks also creates and awning off the back side when it is in the open position. This is great for camping or other events such as tailgating. The front of the rack will accept up to a 50” LED Light bar in 3 different positions.(Those being: on top, inside, or underneath at the top side of the windshield) Available accessories are: drivers and/or passenger side ladders, an aluminum floor kit, hi-lift jack mount, front air deflector, axe or shovel mounts, and a retractable handle that assists in opening or closing the rack.

Note: Rack comes with Textured Black Powder Coating

More Info...

LoD 2007-2015 Jeep Jk Armor Lite Midwidth   $499.00
Add Multi

LoD 2007-2015 Jeep Jk Armor Lite Midwidth

LoD 2007-2015 Jeep Jk Armor Lite Midwidth

New!! The LoD Armor Lite Midwidth Bumper is constructed from high strength 1/8" steel. The base bumper weighs less than 35lbs! The Armor Lite bumper is a modular design meaning you can add options to it. The base bumper includes two bolt-on shackle mounts. You have the option of adding a bolt-on bull bar or bolt-on stinger guard. If you plan to run a winch you will need the optional fairlead mount.We also have an axillary light mounting bracket the allows you to run two extra lights. This bumper will accept any winch including the warn Powerplant and Zeon.

Attention: All Armor Lite Bumpers include a LoD Logo not shown in the photo's. The Logo is centered on the face of the bumper.Note: If your Jeep did not include the factory fog light option we have a 55 watt halogen kit that can be used with this bumper. 

More Info...

LOD 2007-2015 Jeep Jk Armor Lite Shorty   $499.00
Add Multi

LOD 2007-2015 Jeep Jk Armor Lite Shorty

LOD 2007-2015 Jeep Jk Armor Lite Shorty

New!! The LoD Armor Lite Midwidth Bumper is constructed from high strength 1/8" steel. The base bumper weighs less than 35lbs! The Armor Lite bumper is a modular design meaning you can add options to it. The base bumper includes two bolt-on shackle mounts. You have the option of adding a bolt-on bull bar or bolt-on stinger guard. If you plan to run a winch you will need the optional fairlead mount. We also have an axillary light mounting bracket the allows you to run two extra lights. This bumper will accept any winch including the warn Powerplant and Zeon.
Attention: All Armor Lite Bumpers include a LoD Logo not shown in the photo's. The Logo is centered on the face of the bumper. Note: If your Jeep did not include the factory fog light option we have a 55 watt halogen kit that can be used with this bumper. 

More Info...

LOD 2007-2015 Jeep JK Crawler Front Winch Bumper   $638.00
Add Multi

LOD 2007-2015 Jeep JK Crawler Front Winch Bumper

LOD 2007-2015 Jeep JK Crawler Front Winch Bumper

The LoD Crawler Front winch bumper for the 2007-2010 Jeep JK is constructed of 3/16" steel and is designed for maximum clearance and approach angle. The Hidden mounting bolts add to the clean and tough look of the Crawler bumper. The bumper comes standard with a winch mounting plate. The winch plate is designed to accept many of the popular winches including the Warn Powerplant. This bumper was designed to allow the winch to sit between the frame rails for added protection and improved air flow. Note: This bumper will not accept the factory fog lights.

More Info...

LOD 2007-2015 Jeep JK Fullwidth Signature Series Rear Bumper Only   $649.00
Add Multi

LOD 2007-2015 Jeep JK Fullwidth Signature Series Rear Bumper Only

LOD 2007-2015 Jeep JK Fullwidth Signature Series Rear Bumper Only

The Signature Series bumper is constructed of a combination of 10 gauge, 3/16", and 1/4" steel. The bumper is designed with an integrated 2" receiver that ties directly into the rear cross-member of the Jeep. The bumper also comes standard with two fully welded shackle mounts that accept 3/4" shackles with up to a 7/8" pin. We also provide an optional light kit that provides 2- 55 watt halogen lights with wiring and a switch. The bumper comes standard with provisions for bolting in the lights we provide with the optional kit. To see more photo's of the Signature Series Bumper click the link at the bottom. NOTE: Images in gallery may include tire carrier system, however, the basic bumper is still the same. 

More Info...

LOD 2007-2015 Jeep JK Generation 4 Signature Series Fullwidth Bumper w/ Tire Carrier   $1,144.00
Add Multi

LOD 2007-2015 Jeep JK Generation 4 Signature Series Fullwidth Bumper w/ Tire Carrier

LOD 2007-2015 Jeep JK Generation 4 Signature Series Fullwidth Bumper w/ Tire Carrier

-CNC Laser Cut for Precision Fitment

-Bronze wear washer at hinge to eliminate powder coating wear and rust

-Carrier Locks in the open position

-Adjustable Jerry Can mounting Height (Driver and Passenger Side Mounting)

-Adjustable Trail Rack Mounting Height

-Adjustable Tire Mounting Height

-Capable of carrying a PowerTank (Driver or Passenger Side Mounting)Â

-Holds up to 40" spare Limited to 37"spare with gas can holders

-Available with a two (2) stage Zinc Enriched Primer Powder Coating

-Capable of carrying many different configurations of RotoPax Gas Cans (2 and 3 Gallon)

-Capable of carrying Blitz style Jerry Cans

-Includes mounting provisions for High-Lift jacks (Easily accessible w/o removing Tire)

-Includes mounting bracket for CB Antenna

-Carrier system designed to prevent water and trail debris build-up

-New third Brake Light mount attaches directly to the rear door

More Info...

LOD 2007-2015 Jeep JK Signature Series Door Linked Fullwidth Bumper w/ Generation 4 Tire Carrier   $1,144.00
Add Multi

LOD 2007-2015 Jeep JK Signature Series Door Linked Fullwidth Bumper w/ Generation 4 Tire Carrier

LOD 2007-2015 Jeep JK Signature Series Door Linked Fullwidth Bumper w/ Generation 4 Tire Carrier

-CNC Laser Cut for Precision Fitment

- Bronze wear washer at hinge to eliminate powder coating wear and rust

-Adjustable Jerry Can mounting Height (Passenger Side Mounting)

-Adjustable Tire Mounting Height

-Capable of carrying a PowerTank (Passenger Side Mounting)

-Holds up to 40" spare Limited to 37"spare with gas can holders

-Available with a two (2) stage Zinc Enriched Primer Powder Coating

-Capable of carrying many different configurations of RotoPax Gas Cans (2 and 3 Gallon)

-Capable of carrying Blitz style Jerry Cans

-Includes mounting provisions for High-Lift jacks (Easily accessible w/o removing Tire)

-Includes mounting bracket for CB Antenna

-Carrier system designed to prevent water and trail debris build-up

-New third Brake Light mount attaches directly to the rear door

More Info...

LOD 2007-2015 Jeep JK Signature Series Shorty Door Linked Bumper w/ Generation 4 Tire Carrier   $1,144.00
Add Multi

LOD 2007-2015 Jeep JK Signature Series Shorty Door Linked Bumper w/ Generation 4 Tire Carrier

LOD 2007-2015 Jeep JK Signature Series Shorty Door Linked Bumper w/ Generation 4 Tire Carrier

-CNC Laser Cut for Precision Fitment

- Bronze wear washer at hinge to eliminate powder coating wear and rust

-Adjustable Jerry Can mounting Height (Passenger Side Mounting)

-Adjustable Tire Mounting Height

-Capable of carrying a PowerTank (Passenger Side Mounting)

-Holds up to 40" spare Limited to 37"spare with gas can holders

-Available with a two (2) stage Zinc Enriched Primer Powder Coating

-Capable of carrying many different configurations of RotoPax Gas Cans (2 and 3 Gallon)

-Capable of carrying Blitz style Jerry Cans

-Includes mounting provisions for High-Lift jacks (Easily accessible w/o removing Tire)

-Includes mounting bracket for CB Antenna

-Carrier system designed to prevent water and trail debris build-up

-New third Brake Light mount attaches directly to the rear door

More Info...

LOD 2010-2012 Dodge Ram 2500-3500 Front Winch Bumper with Full Guard   $1,899.00
Add Multi

LOD 2010-2012 Dodge Ram 2500-3500 Front Winch Bumper with Full Guard

LOD 2010-2012 Dodge Ram 2500-3500 Front Winch Bumper with Full Guard

More Info...

LOD 2010-2012 Dodge Ram 2500-3500 Front Winch Bumper with Pre-Runner Guard   $1,549.00
Add Multi

LOD 2010-2012 Dodge Ram 2500-3500 Front Winch Bumper with Pre-Runner Guard

LOD 2010-2012 Dodge Ram 2500-3500 Front Winch Bumper with Pre-Runner Guard

The LoD front winch bumper is engineered to accept the WARN 16.5 winch and anything smaller. The bumper features two (2)fully welded D-ring mounts, two 5” auxiliary driving light provisions, integrated air vents, fully adjustable mounting system for a perfect fit each time. The bumper is constructed from a range of 1/4”, 3/16”, and 10ga steel. The bumper utilizes a high strength low alloy steel (HSLA) for the 10 ga shell to eliminate weight without sacrificing any strength. So outfit your truck or fleet with the lightest, strongest and most form fitting bumper on the market today.

The bumper comes standard with a durable powder coat finish. It is available with a full guard, pre-runner style guard, or no guard. The bumper is designed to provide a clean bold look to the front of your vehicle. The curved bumper ends are unlike any other aftermarket bumper. The bumper resembles the look of a stamped bumper with the curved ends.

The full guard system utilizes 10 ga steel as well as 2”, and 2-1/2” tube. The bumper with the full guard system weighs in at 175 lbs making the full system very lightweight when compared to others. This is accomplished by using a high strength low alloy steel that

LoD bumpers are designed and built with pride in the USA. Each bumper comes with a lifetime warranty against any manufacturing defect. If it breaks we will replace it

More Info...

LOD 2010-2012 Dodge Ram 2500-3500 Rear Bumper   $979.00
Add Multi

LOD 2010-2012 Dodge Ram 2500-3500 Rear Bumper

LOD LOD 2010-2012 Dodge Ram 2500-3500 Rear Bumper

The LoD bumper features two (2) fully welded D-ring mounts, two 5” auxiliary light provisions, and available with reverse sensor provisions. The bumper is constructed from 1/4” and 3/16”. So outfit your truck or fleet with the lightest, strongest and most form fitting bumper on the market today. The bumper comes standard with a durable powder coat finish. The bumper is designed to provide a clean bold look to the rear of your vehicle. The curved bumper ends are unlike any other aftermarket bumper. The bumper resembles the look of a stamped bumper with the curved ends. LoD bumpers are designed and built with pride in the USA. Each bumper comes with a lifetime warranty against any manufacturing defect. If it breaks we will replace it!

More Info...

LOD 2010-2013 Dodge Ram 2500-3500 Front Winch Bumper   $1,419.00
Add Multi

LOD 2010-2013 Dodge Ram 2500-3500 Front Winch Bumper

LOD 2010-2013 Dodge Ram 2500-3500 Front Winch Bumper

The LoD front winch bumper is engineered to accept the WARN 16.5 winch and anything smaller. The bumper features two (2)fully welded D-ring mounts, two 5” auxiliary driving light provisions, integrated air vents, fully adjustable mounting system for a perfect fit each time. The bumper is constructed from a range of 1/4”, 3/16”, and 10ga steel. The bumper utilizes a high strength low alloy steel (HSLA) for the 10 ga shell to eliminate weight without sacrificing any strength. So outfit your truck or fleet with the lightest, strongest and most form fitting bumper on the market today.

The bumper comes standard with a durable powder coat finish. It is available with a full guard, pre-runner style guard, or no guard. The bumper is designed to provide a clean bold look to the front of your vehicle. The curved bumper ends are unlike any other aftermarket bumper. The bumper resembles the look of a stamped bumper with the curved ends.

The full guard system utilizes 10 ga steel as well as 2”, and 2-1/2” tube. The bumper with the full guard system weighs in at 175 lbs making the full system very lightweight when compared to others. This is accomplished by using a high strength low alloy steel that

LoD bumpers are designed and built with pride in the USA. Each bumper comes with a lifetime warranty against any manufacturing defect. If it breaks we will replace it! 

More Info...

LOD Armor Lite Bolt-on Auxiliary Light Mount   $29.00
Add Multi

LOD Armor Lite Bolt-on Auxiliary Light Mount

LOD Armor Lite Bolt-on Auxiliary Light Mount

The Armor Lite bolt-on Auxiliary Light Mount bolts directly to the front of the fairlead mount. it provides two light tabs for mounting lights down low. This mount will only work with the fairlead mount. If you do not have the fairlead mount this bracket will not work.

More Info...

LOD Armor Lite Bolt-on Bull Bar Guard   $99.00
Add Multi

LOD Armor Lite Bolt-on Bull Bar Guard

LOD Armor Lite Bolt-on Bull Bar Guard

The Armor Lite Bull Bar guard is a bolt-on guard that only fits our Armor Lite bumpers. The guard is made of 1-3/4" tube and features two mounting tabs on top for running extra lights.

More Info...

LOD Armor Lite Bolt-on Skid Plate   $79.00
Add Multi

LOD Armor Lite Bolt-on Skid Plate

LOD Armor Lite Bolt-on Skid Plate

The Armor Lite skid plate will bolt directly to any of the Armor Lite bumpers. It is made of 1/8" thick high strength steel.

More Info...

LOD Armor Lite Bolt-on Stinger Guard   $109.00
Add Multi

LOD Armor Lite Bolt-on Stinger Guard

LOD Armor Lite Bolt-on Stinger Guard

The Armor Lite bolt-on Stinger guard is made of 1-3/4" tube. It is .120 wall tube with 1/8" steel gussets. It will bolt directly to either the Armor Lite shorty or midwidth.

More Info...

LOD Easy Access Sliding Roof Rack Aluminum Floor Panel Kit   $329.00
Add Multi

LOD Easy Access Sliding Roof Rack Aluminum Floor Panel Kit

LOD Easy Access Sliding Roof Rack Aluminum Floor Panel Kit

The LoD aluminum floor kit is constructed out of 1/8" thick aluminum. The panels are designed to be lightweight. The panels provide a floor system that allows you to carry smaller items.

More Info...

LOD Easy Access Sliding Roof Rack Open Assist Retractable Handle   $89.00
Add Multi

LOD Easy Access Sliding Roof Rack Open Assist Retractable Handle

LOD Easy Access Sliding Roof Rack Open Assist Retractable Handle

The retractable handle is designed to provide a convenient location to grab ahold of when sliding the rack system open and closed. If your Jeep is lifted this handle is a must so that you can reach and open the rack system.

More Info...

LOD Ford 2011-2016 F250-F350 Heavy Duty Base Winch Bumper   $1,299.00
Add Multi

LOD Ford 2011-2016 F250-F350 Heavy Duty Base Winch Bumper

LOD Ford 2011-2016 F250-F350 Heavy Duty Base Winch Bumper

Features:

Built 100% in the USA!
High quality Form Fitting Design
Comes with Standard D-ring mounts
Durable fine black powder coat finish
Built from High Strength Armor Lite Steel
Interchangeable LED or Halogen light Bezels
Available with 3 Different guard options
Accommodates up to 16,500 lb winches 

More Info...

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Base Winch Bumper w Pre-Runner Bull Bar guard   $1,399.00
Add Multi

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Base Winch Bumper w Pre-Runner Bull Bar guard

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Base Winch Bumper w Pre-Runner Bull Bar guard

Features:

Built 100% in the USA!
High quality Form Fitting Design
Comes with Standard D-ring mounts
Durable fine black powder coat finish
Built from High Strength Armor Lite Steel
Interchangeable LED or Halogen light Bezels
Available with 3 Different guard options
Accommodates up to 16,500 lb winches 

More Info...

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Base Winch Bumper with Full Guard   $1,699.00
Add Multi

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Base Winch Bumper with Full Guard

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Base Winch Bumper with Full Guard

Features:

Built 100% in the USA!
High quality Form Fitting Design
Comes with Standard D-ring mounts
Durable fine black powder coat finish
Built from High Strength Armor Lite Steel
Interchangeable LED or Halogen light Bezels
Available with 3 Different guard options
Accommodates up to 16,500 lb winches 

More Info...

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Rear bumper   $979.00
Add Multi

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Rear bumper

LOD Ford 2011-2016 F250-F350 Signature Series Heavy Duty Rear bumper

Features:

-Built 100% in the USA!
-Built in Steps for easy access to the bed
-High quality Form Fitting Design
-Comes with Standard D-ring mounts
-Durable fine black powder coat finish
-Built from High Strength Armor Lite Steel
-Interchangeable LED or Halogen light Bezels
-Integrated Mounting for Factory Trailer plugs
-Works with the Factory existing receiver hitch 

More Info...

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper   $1,299.00
Add Multi

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper

Features:

Built 100% in the USA!
High quality Form Fitting Design
Comes with Standard D-ring mounts
Durable fine black powder coat finish
Built from High Strength Armor Lite Steel
Interchangeable LED or Halogen light Bezels
Available with 3 Different guard options
Accommodates up to 16,500 lb winches 

More Info...

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper w Pre-Runner Bull Bar Guard   $1,399.00
Add Multi

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper w Pre-Runner Bull Bar Guard

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper w Pre-Runner Bull Bar Guard

Features:

Built 100% in the USA!
High quality Form Fitting Design
Comes with Standard D-ring mounts
Durable fine black powder coat finish
Built from High Strength Armor Lite Steel
Interchangeable LED or Halogen light Bezels
Available with 3 Different guard options
Accommodates up to 16,500 lb winches

More Info...

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper with Full Guard   $1,699.00
Add Multi

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper with Full Guard

LOD GMC 2015-16 2500-3500 Signature Series Heavy Duty Base Front Winch Bumper with Full Guard

Features:

-Built 100% in the USA!
-Built in Steps for easy access to the bed
-High quality Form Fitting Design
-Comes with Standard D-ring mounts
-Durable fine black powder coat finish
-Built from High Strength Armor Lite Steel
-Interchangeable LED or Halogen light Bezels
-Integrated Mounting for Factory Trailer plugs
-Works with the Factory existing receiver hitch 

More Info...

LOD Jeep Jk Bolt-on 3rd Brake Light Mount   $59.00
Add Multi

LOD Jeep Jk Bolt-on 3rd Brake Light Mount

LOD Jeep Jk Bolt-on 3rd Brake Light Mount

The LoD 3rd Brake Light Mount bolts directly to the rear door to provide you with a plug and play type design. The mount is completely adjustable up down so it will work with many different sizes of spare tires. This mount is finished in texture black to match the existing finish of the factory light.

More Info...

LOD Jeep Jk Bolt-on Powertank Mount   $69.00
Add Multi

LOD Jeep Jk Bolt-on Powertank Mount

LOD Jeep Jk Bolt-on Powertank Mount

The LoD Powertank mount is offered for those that want to mount a Powertank to their carrier system. The mount is completely reversible and sold individually. The Powertank mounting arm will accommodate any size spare up to a 37".

Note: These mounts are sold individually. If you need a pair then order a quantity of (2) two.

More Info...

LOD Jeep Jk Generation 3/4 Blitz Style Jerry Can Mounts   $189.00
Add Multi

LOD Jeep Jk Generation 3/4 Blitz Style Jerry Can Mounts

LOD Jeep Jk Generation 3/4 Blitz Style Jerry Can Mounts

The Generation 3 Jerry Can Holders are designed to bolt directly to your Signature Series Generation 3 tire carrier. The Generation 3 Jerry Can Holders are similar to the previous version, however, the mounting plates have been beefed up for added strength. The can holder redesign also now features a steel strap that bolts over the jerry can to provide secure mounting of the Gas Can. These Can Holders will fit with any size spare up to a 37".

More Info...

LOD Jeep Jk Generation 3/4 Bolt-on Trail Rack   $189.00
Add Multi

LOD Jeep Jk Generation 3/4 Bolt-on Trail Rack

LOD Jeep Jk Generation 3/4 Bolt-on Trail Rack

The Generation 3 Trail Rack is our newest trail rack system. It is made to be more adjustable than previous versions. The rack is designed to be fully adjustable up and down. The rack can easily be moved up or down depending on your preference. The Generation 3 Trail Rack System will provide you with extra storage space for items that don't need to be kept inside the vehicle. The rack system is designed to be adjustable to accommodate any size spare up to a 37".

More Info...

LOD Jeep Jk Generation 3/4 RotoPax 2 Gallon Over/Under Gas Can Mounts   $179.00
Add Multi

LOD Jeep Jk Generation 3/4 RotoPax 2 Gallon Over/Under Gas Can Mounts

LOD Jeep Jk Generation 3/4 RotoPax 2 Gallon Over/Under Gas Can Mounts

The LoD RotoPax Over/Under 2 gallon gas can mounts are capable of carrying two of the two gallon Rotopax gas cans per side. These are designed to mount two RotoPax 2 gallon cans locked together in the. This arrangement offers a compact alternative to carrying up to 8 gallons of addition fuel. These are a must for any long adventures! 

More Info...

LOD Jeep Jk Generation 3/4 RotoPax 2/3 Gallon Gas Can Mounts   $75.00
Add Multi

LOD Jeep Jk Generation 3/4 RotoPax 2/3 Gallon Gas Can Mounts

LOD Jeep Jk Generation 3/4 RotoPax 2/3 Gallon Gas Can Mounts

Now available from LoD are mounting arms for the RotoPax Gas cans. These arms are designed to carry either the 2 gallon or three gallon RotoPax Gas cans. These arms are reversible from side to side meaning the mounting arm can be used on the passenger or driver side. 

Note: These arms are sold individually so if you would like to carry a pair of gas cans then be sure to add a quantity of two into your cart.

More Info...

LOD Jeep Jk Signature Series Mid-Width Bolt-on Skid Plate   $79.00
Add Multi

LOD Jeep Jk Signature Series Mid-Width Bolt-on Skid Plate

LOD Jeep Jk Signature Series Mid-Width Bolt-on Skid Plate

This product is for those who already have the LoD Mid-Width front winch bumper and want to add the skid plate. The skid plate will bolt to the bottom of the bumper and drop down to bolt underneath the frame cross-member as well. 

More Info...

LOD LoD Easy Access Sliding Roof Rack Air Deflector   $59.00
Add Multi

LOD LoD Easy Access Sliding Roof Rack Air Deflector

LOD LoD Easy Access Sliding Roof Rack Air Deflector

The LoD easy access sliding roof rack air deflector is a bolt on part used to reduce the amount of wind noise created by running a roof rack. The deflector is fabricated from 14 gauge steel. The air deflector includes slotted holes that allow you to bolt a lights to the top side.

More Info...


Displaying 1 to 50 (of 69 products)

We Accept

316853637 requests since
Thursday 13 May, 2010

Social Networking

  • Follow us on Twitter
  • Find us on Facebook
  • RSS Feed
  • Videos on You Tube

Subscribe Newsletter

Subscribe to our Newsletter to get Latest News & Updates about our Services.


Contact Info

4x4 GroupBuy.com
8 Turning Leaf Drive
Unit 1
Windham, ME 04062
207-689-3191
Pit Bull