Quick Find

FAB Wrangler JK and JK RHD 07-14 Lower Steering Knuckle Gusset   $42.75
Add Multi

FAB Wrangler JK and JK RHD 07-14 Lower Steering Knuckle Gusset

FAB Wrangler JK and JK RHD 07-14 Lower Steering Knuckle Gusset

  • Weld-on reinforcement gusset strengthens inner steering knuckle on front axle
  • Properly designed to connect inner steering knuckle to axle tube for greater joint integrity
  • Profiled shape is laser cut to ensure precise fitment on factory Dana 44 and Dana 30 front axles
  • Extends life of ball joints by preventing knuckles from flexing under stress
  • Heavy-duty 5/8 in. mild steel allows superior weld penetration

1 Compatible with OE Dana 30 or Dana 44 front axle.
2 Install gussets before bending of inner knuckles occur to prevent replacement of axle housing.
3 Whenever possible, upper and lower gussets should be installed together for maximum strength and reinforcement.

More Info...

Flex Connect Performance Spring Kit   $90.25
Add Multi

Flex Connect Performance Spring Kit

Flex Connect Performance Spring Kit

Performance Spring Kit for Flex Connect Links


Performance Spring Kit allows for roll stiffness to be adjusted using one of the 3 unique replacement spring sets. These springs are tuned to work in different terrains or vehicle setups.1 JKS Flex Connect Links Required PN PAC2110

More Info...

JKS 1-1.25in Compact Jam Nut Wrench   $12.35
Add Multi

JKS 1-1.25in Compact Jam Nut Wrench

JKS 1-1.25in Compact Jam Nut Wrench

JKS Compact Jam Nut Wrench Features

  • Made of 3/8” laser cutting low carbon steel with a durable black e-coated finish, these wrenches are both unique and functional.
  • They work in multiple positions when coupled with a standard ½” drive ratchet.
  • The ratchet can be indexed for the optimum position and leverage.
  • Contact is made with all 6 sides of the nut similar to a line wrench for brake fittings.
  • .While designed to be used to lock off jam nuts on JKS adjustable track bars, these wrenches can be used for any track bar, control arm, etc with standard 1-1/4” jam nuts.
  • A good no-slip grip on the nut lessens the chance of bloody knuckles!
  • Compact design, about 1/4 the length of a standard wrench, easily fits in the front pouch of a standard tool bag or Jeep center console and saves tool box space.
  • Equivalent wrench size is 1-7/8”
  • Fits: OGS121, OGS122

1 1/2" Ratchet Not Included.

More Info...

JKS 1in Compact Jam Nut Wrench   $12.35
Add Multi

JKS 1in Compact Jam Nut Wrench

JKS 1in Compact Jam Nut Wrench

JKS Compact Jam Nut Wrench Features

  • Made of 3/8” laser cutting low carbon steel with a durable black e-coated finish, these wrenches are both unique and functional.
  • They work in multiple positions when coupled with a standard ½” drive ratchet.
  • The ratchet can be indexed for the optimum position and leverage.
  • Contact is made with all 6 sides of the nut similar to a line wrench for brake fittings.
  • .While designed to be used to lock off jam nuts on JKS adjustable track bars, these wrenches can be used for any track bar, control arm, etc with standard 1” jam nuts.
  • A good no-slip grip on the nut lessens the chance of bloody knuckles!
  • Compact design, about 1/4 the length of a standard wrench, easily fits in the front pouch of a standard tool bag or Jeep center console and saves tool box space.
  • Equivalent wrench size is 1-1/2”
  • Fits: OGS125, OGS126, OGS127, OGS128, OGS129, OGS151, OGS151B, OGS155, OGS159, OGS950, OGS951

1 1/2" Ratchet Not Included.

More Info...

JKS Cherokee XJ & Comanche MJ 84-01 Front Lower Bar Pin Adapter   $76.00
Add Multi

JKS Cherokee XJ & Comanche MJ 84-01 Front Lower Bar Pin Adapter

JKS Cherokee XJ & Comanche MJ 84-01 Front Lower Bar Pin Adapter

Bar Pin Adapter Features

  • Heavy duty bracket converts factory bar pin style shock mount to accept professional off-road racing shock absorbers
  • Mounting pin accommodates 12mm or 1/2 in. ID x 5/8 in. wide spherical rod bearings
  • Conical shape allows unrestricted shock movement and ultra durable preload cone minimizes noise and vibration
  • Multi-directional blocks provide two sets of mounting holes for front and rear compatibility (some applications)
  • Anti-corrosive plating and hardware ensure long-lasting protection

1 Compatible with most racing shock absorbers using 0.50 in. ID spherical bearings.

More Info...

JKS Cherokee XJ 84-01 Forged Series Adjustable Control Arms Lower Control Arms   $332.50
Add Multi

JKS Cherokee XJ 84-01 Forged Series Adjustable Control Arms Lower Control Arms

JKS Cherokee XJ 84-01 Forged Series Adjustable Control Arms Lower Control Arms

Forged Series Adjustable Length Lower Control Arm Features

  • Adjustable arm design utilizing a forged adjustable flex end and jam nut.
  • Forged end is fully rebuildable and greaseable.
  • 1-1/4”-12 threads provide ultimate strength and fine-tune adjustability.
  • Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation.
  • CNC formed for proper tire, frame and axle mount clearance.

1 Compatible with 0 to 6.0 in. suspension lift and OE attachment points.

More Info...

JKS Cherokee XJ 84-01 HD Rear Shackle   $104.50
Add Multi

JKS Cherokee XJ 84-01 HD Rear Shackle

JKS Cherokee XJ 84-01 HD Rear Shackle

HD Shackle Features

  • Boomerang style shackle optimizes rear suspension travel by allowing full compression and extension of leaf springs
  • Extended length increases rear ride height 1 in. for improved tire clearance
  • Greasable Dura-Thane chassis bushing is included for smooth, quiet operation and easy lubrication
  • Rigid design prevents binding and bushing fatigue commonly associated with OE and inferior shackle designs
  • Heavy duty construction ensures correct operation of springs and bushings under severe off-road conditions
  • Durable powdercoat finish provides long-lasting protection
More Info...

JKS Cherokee XJ 84-01 Rear Upper Bar Pin Adapter   $76.00
Add Multi

JKS Cherokee XJ 84-01 Rear Upper Bar Pin Adapter

JKS Cherokee XJ 84-01 Rear Upper Bar Pin Adapter

Bar Pin Adapter Features

  • Heavy duty bracket converts factory bar pin style shock mount to accept professional off-road racing shock absorbers
  • Mounting pin accommodates 12mm or 1/2 in. ID x 5/8 in. wide spherical rod bearings
  • Conical shape allows unrestricted shock movement and ultra durable preload cone minimizes noise and vibration
  • Multi-directional blocks provide two sets of mounting holes for front and rear compatibility (some applications)
  • Anti-corrosive plating and hardware ensure long-lasting protection

1 Compatible with most racing shock absorbers using 0.50 in. ID spherical bearings.

More Info...

JKS Comanche MJ 86-92 HD Rear Shackle   $104.50
Add Multi

JKS Comanche MJ 86-92 HD Rear Shackle

JKS Comanche MJ 86-92 HD Rear Shackle

HD Shackle Features

  • Boomerang style shackle optimizes rear suspension travel by allowing full compression and extension of leaf springs
  • Extended length increases rear ride height 1 in. for improved tire clearance
  • Greasable Dura-Thane chassis bushing is included for smooth, quiet operation and easy lubrication
  • Rigid design prevents binding and bushing fatigue commonly associated with OE and inferior shackle designs
  • Heavy duty construction ensures correct operation of springs and bushings under severe off-road conditions
  • Durable powdercoat finish provides long-lasting protection
More Info...

JKS FAB Adjustable Trackbar Kit with 2.5in Johnny Joint   $223.25
Add Multi

JKS FAB Adjustable Trackbar Kit with 2.5in Johnny Joint

JKS FAB Adjustable Trackbar Kit with 2.5in Johnny Joint

FAB Adjustable Trackbar Kit Features

  • Build-it-yourself kit includes materials needed to make your own custom trackbar
  • Superior quality replacement for original fixed length panhard rod
  • Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
  • Fine adjustment threads enable ultra precise axle positioning
  • Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
  • Supplied with 2.5" Diameter Johnny Joint and rebuildable poly bushing.
  • Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
More Info...

JKS FAB Bushing Cradle 2.132 in Dia 1.58 in Wide   $19.00
Add Multi

JKS FAB Bushing Cradle 2.132 in Dia 1.58 in Wide

JKS FAB Bushing Cradle 2.132 in Dia 1.58 in Wide

FAB Bushing Cradle Features

  • Heavy gauge steel sleeve is precisely machined to accept OE rubber suspension bushing 3924IR
  • Profiled inner diameter cradles and supports press-in type bushings for proper retention
  • Weld-on design is perfect for building custom suspension arms, track bars, or even motor mounts
More Info...

JKS FAB Bushing Cradle 2.25 in Dia 1.76 in Wide   $19.00
Add Multi

JKS FAB Bushing Cradle 2.25 in Dia 1.76 in Wide

JKS FAB Bushing Cradle 2.25 in Dia 1.76 in Wide

FAB Bushing Cradle Features

  • Heavy gauge steel sleeve is precisely machined to accept OE rubber suspension bushing 3916IR
  • Profiled inner diameter cradles and supports press-in type bushings for proper retention
  • Weld-on design is perfect for building custom suspension arms, track bars, or even motor mounts
More Info...

JKS FAB Bushing Cradle 2.375 in Dia 2.175 in Wide   $19.00
Add Multi

JKS FAB Bushing Cradle 2.375 in Dia 2.175 in Wide

JKS FAB Bushing Cradle 2.375 in Dia 2.175 in Wide

FAB Bushing Cradle Features

  • Heavy gauge steel sleeve is precisely machined to accept OE rubber suspension bushing 3917IR
  • Profiled inner diameter cradles and supports press-in type bushings for proper retention
  • Weld-on design is perfect for building custom suspension arms, track bars, or even motor mounts
More Info...

JKS FAB Bushing Cradle 2.625 in Dia 2.0 in Wide   $19.00
Add Multi

JKS FAB Bushing Cradle 2.625 in Dia 2.0 in Wide

JKS FAB Bushing Cradle 2.625 in Dia 2.0 in Wide

FAB Bushing Cradle Features

  • Heavy gauge steel sleeve is precisely machined to accept OE rubber suspension bushing SB02B601523
  • Profiled inner diameter cradles and supports press-in type bushings for proper retention
  • Weld-on design is perfect for building custom suspension arms, track bars, or even motor mounts
More Info...

JKS FAB Wrangler JK and JK RHD 07-14 Upper Steering Knuckle Gusset   $42.75
Add Multi

JKS FAB Wrangler JK and JK RHD 07-14 Upper Steering Knuckle Gusset

JKS FAB Wrangler JK and JK RHD 07-14 Upper Steering Knuckle Gusset

  • Weld-on reinforcement gusset strengthens inner steering knuckle on front axle
  • Properly designed to connect inner steering knuckle to axle tube for greater joint integrity
  • Profiled shape is laser cut to ensure precise fitment on factory Dana 44 and Dana 30 front axles
  • Extends life of ball joints by preventing knuckles from flexing under stress
  • Heavy-duty 5/8 in. mild steel allows superior weld penetration

1 Compatible with OE Dana 30 or Dana 44 front axle.
2 Install gussets before bending of inner knuckles occur to prevent replacement of axle housing.
3 Whenever possible, upper and lower gussets should be installed together for maximum strength and reinforcement.

More Info...


Displaying 1 to 50 (of 158 products)

We Accept

316816359 requests since
Thursday 13 May, 2010

Social Networking

  • Follow us on Twitter
  • Find us on Facebook
  • RSS Feed
  • Videos on You Tube

Subscribe Newsletter

Subscribe to our Newsletter to get Latest News & Updates about our Services.


Contact Info

4x4 GroupBuy.com
8 Turning Leaf Drive
Unit 1
Windham, ME 04062
207-689-3191
Yukon