Quick Find

Gen-Right 3/4in Round LED Marker LED Amber   $30.00
Add Multi

Gen-Right 3/4in Round LED Marker LED Amber

Gen-Right 3/4in Round LED Marker LED Amber

  • Designed to fit in the round hole on the front of most tube front fenders.
  • Super bright AMBER color round LED.
  • Rubber mounting gromet allows for hole size variations.
  • D.O.T. legal.
  • Fits in a 3/4" hole.
  • Sold as a pair.
  • 8" long leads are pre-wired to bulb.
More Info...

Gen-Right 3/4in Round LED Marker LED Red   $20.00
Add Multi

Gen-Right 3/4in Round LED Marker LED Red

Gen-Right 3/4in Round LED Marker LED Red

This is a two piece set of the 3/4" round RED colored Stealth L.E.D. side marker lights, which is ideal for marking the side of your vehicle in the rear.

Kit includes one pair of the bright RED 3/4" round LED's and the rubber mounting grommets.

D.O.T. legal
Fits in a 3/4" hole.

More Info...

Gen-Right 4in Rear Tube Flare TJ-LJ-YJ-CJ   $329.99
Add Multi

Gen-Right 4in Rear Tube Flare TJ-LJ-YJ-CJ

Gen-Right 4in Rear Tube Flare TJ-LJ-YJ-CJ

FEATURES:

  • Cool tube styling and tough trail function.
  • Flat rear "flare" top plate to match the front GenRight tube front fender models.
  • Flare shape is similar to the factory TJ rear plastic flares for similar tire clearance and look.
  • Made with 1-1/2" diameter x .120" wall thick tubing and then topped with 1/8" thick steel plate.
  • Will fit a TJ, YJ, CJ or LJ.
  • As pictured, this rear flare can fit up to a 40" tire.
  • Flares are sold in pairs (does not include the corner guards, sold separately).
  • This tube flare is also available in a 6" wide version too (TFR-1001).
  • These tube rear flares will fit on standard or stretch GenRight corners.
  • Also available in the new Hi-Fender version (TFR1020)
More Info...

Gen-Right 4in Rear Tube Hi-Flare TJ-LJ-YJ-CJ Wrangler   $362.99
Add Multi

Gen-Right 4in Rear Tube Hi-Flare TJ-LJ-YJ-CJ Wrangler

FEATURES:

  • Hi-Fender style allows clearance for big tires on little or no lift.
  • Flat styling, matches the front tube fender flares.
  • Shape is similar to the factory TJ rear plastic flares for similar tire clearance and look, but trail tough function.
  • Built from tough 1-1/2" diameter x .120" wall thick tubing and then topped with 1/8" thick steel plate, these flares will let you bash your way through your favorite trail obstacles.
  • They will fit a TJ, YJ, CJ or LJ.
  • As pictured, this rear flare can easily fit up to a 40" tire.
  • Flares are sold in pairs (does not include the corner guards).
  • This tube Hi-Flare is also available in a 6" wide version too (TFR-1021).
More Info...

Gen-Right 6in Rear Tube Flare TJ-LJ-YJ-CJ Wrangler   $384.99
Add Multi

Gen-Right 6in Rear Tube Flare TJ-LJ-YJ-CJ Wrangler

Gen-Right 6in Rear Tube Flare TJ-LJ-YJ-CJ Wrangler

FEATURES:

  • Flat style top plate to match the front fender flares.
  • Shape is similar to the factory TJ rear plastic flares for similar tire clearance and look, but trail tough function.
  • Built from tough 1-1/2" diameter x .120" wall thick tubing and then topped with 1/8" thick steel plate, these flares will let you bash your way through your favorite trail obstacles.
  • They will fit a TJ, YJ, CJ or LJ.
  • As pictured, this rear flare can fit up to 42" tire.
  • Flares are sold in pairs (does not include the corner guards).
  • This tube flare is also available in a 4" wide version too (TFR-1000).
More Info...

Gen-Right CJ Corner Guard set Full STD   $351.99
Add Multi

Gen-Right CJ Corner Guard set Full STD

Gen-Right CJ Corner Guard set Full STD

FEATURES:

  • Wheel opening is in stock location.
  • Laser cut from 3/16" thick SOLID steel plate, just like our rock sliders.
  • The 90 degree bend is formed with a single "hit" die on a CNC press brake to assure this product matches the shape of your Jeeps tub.
  • Stock wheel opening "shape" is retained (same) to still fit a stock CJ fender flare or the GenRight metal tube rear flare TFR1000 or TFR1001 and remain street legal.
  • Each set of panels has the factory mounting holes laser cut in for the tail lights and gas filler to make installation quicker.
  • The mounting holes are pre-drilled and countersunk (we use 2 more mounting bolts than other brands) to secure the corner to the tub.
  • Includes large 5/16" Size Countersunk Stainless Steel Bolts (flush type) to securely mount our corners to protect your Jeeps tub and look clean!
  • Fits on top of most 6” tall after market 3/16” thick Rocker Guards (rock sliders)
More Info...

Gen-Right CJ Corner Guard set Full Stretch   $351.99
Add Multi

Gen-Right CJ Corner Guard set Full Stretch

Gen-Right CJ Corner Guard set Full Stretch

FEATURES:

  • Wheel opening is moved back (stretched) 4" to fit with our EXT gas tank GST1002
  • Laser cut from 3/16" thick SOLID steel plate, just like our rock sliders.
  • The 90 degree bend is formed with a single "hit" die on a CNC press brake to assure this product matches the shape of your Jeeps tub.
  • Stock wheel opening "shape" is retained (same) to still fit a standard CJ fender flare or the GenRight metal tube rear flare TFR1000 or TFR1001 and remain street legal.
  • Each set of panels has the factory mounting holes laser cut in for the tail lights and gas filler to make installation quicker.
  • The mounting holes are pre-drilled and countersunk (we use 2 more mounting bolts than other brands) to secure the corner to the tub.
  • Includes large 5/16" Size Countersunk Stainless Steel Bolts (flush type) to securely mount our corners to protect your Jeeps tub and look clean!
  • Fits on top of most 6” tall after market 3/16” thick Rocker Guards (rock sliders).
More Info...

Gen-Right CJ Rocker Guard Set w-Bars   $399.99
Add Multi

Gen-Right CJ Rocker Guard Set w-Bars

Gen-Right CJ Rocker Guard Set w-Bars


FEATURES:

  • Specifically designed to fit 1974 thru 1986 CJ-7's.
  • This design gives up NO ground clearance (unlike others) and will not get hung up of trail obstacles.
  • Laser cut and formed from tough 3/16" thick cold rolled steel.
  • Built in Step plate is dimple die punched for extra foot traction.
  • Side (slider) bar is 1-1/2" diameter x .120" thick DOM tubing.
  • FULL protection from wheel well to wheel well (simply slide under your flares).
  • Secures to the side and bottom of the tub.
  • Includes all flush mount Stainless Steel mounting hardware.
  • Powder Coated Black finish.
  • Sold in pairs.
More Info...

Gen-Right CJ-7 Full Roll Cage   $1,539.99
Add Multi

Gen-Right CJ-7 Full Roll Cage

Gen-Right CJ-7 Full Roll Cage

More Info...

Gen-Right Crawler COMP Gas Tank TJ-LJ   $989.99
Add Multi

Gen-Right Crawler COMP Gas Tank TJ-LJ

Gen-Right Crawler COMP Gas Tank TJ-LJ

FEATURES:

  • 1" more ground clearance than stock.
  • Improved departure angle.
  • 15 gallon fuel capacity (New 23 gallon model now available!).
  • Smaller tank makes more room for BIG aftermarket axles.
  • Shape allows for 7" of rear wheelbase stretch (with Dana 44)
  • Mounts in stock tank location.
  • Stock mounting location keeps center of gravity low.
  • Accepts the stock Jeep fuel pump/sensor.
  • 1/8" thick Aluminum alloy tank is TIG welded.
  • Foam liner between tank & skid plate.
  • New style 3/16" thick heavy duty steel skid plate.
  • Assembled with stainless steel straps.
  • Includes factory Mopar roll over / vent valves.
  • Internal baffles reduce fuel movement and keep fuel near the pick up.
  • All tanks are 100% pressure tested.
  • Made in USA !
More Info...

Gen-Right Crawler Enduro Gas Tank CJ   $989.99
Add Multi

Gen-Right Crawler Enduro Gas Tank CJ

Gen-Right Crawler Enduro Gas Tank CJ

FEATURES:

  • Tank is made from 1/8" thick Aluminum alloy
  • INCLUDES a heavy duty 3/16" thick skid plate that matches the shape of the tank.
  • Multiple internal baffles to reduce fuel movement.
  • Patented SUMP keep fuel near the pick up.
  • Work with factory CJ pick up/sending unit or the YJ in-tank.
  • Ground clearance is the same as a CJ with the factory 20 gallon fuel tank.
  • 20 Gallon total fuel capacity.
  • Pre-assembled with new factory Mopar vent valves and a stainless steel strap.
  • Includes rubber gasket for factory YJ pump/sending unit.
  • Patent Pending.
More Info...

Gen-Right Crawler Enduro Gas Tank TJ-LJ   $1,099.99
Add Multi

Gen-Right Crawler Enduro Gas Tank TJ-LJ

Gen-Right Crawler Enduro Gas Tank TJ-LJ

  • Made from 1/8" thick Aluminum alloy and TIG welded.
  • Includes a matching heavy duty 3/16" thick skid plate.
  • A foam liner is between the tank and skid plate.
  • Stainless steel straps hold the tank in the skid plate.
  • Multiple internal baffles to reduce fuel movement & keep fuel near the pick up.
  • Re-uses your stock Jeep fuel pump/sending unit.
  • Works with the factory emmissions and other related equipment so you will not get any check engine lights or other engine computer issues.
  • Ground clearance is the same as stock or slightly lower depending on the model year Jeep you have.
  • 24.5 Gallon total fuel capacity.
  • Includes factory Mopar roll over / vent valves.
  • Patent Pending.
More Info...

Gen-Right Crawler Enduro Gas Tank YJ   $1,149.99
Add Multi

Gen-Right Crawler Enduro Gas Tank YJ

Gen-Right Crawler Enduro Gas Tank YJ

FEATURES:

  • Improved departure angle.
  • Same as stock, 20 gallon fuel capacity.
  • Still works with leaf springs.
  • Mounts in stock tank location, with 7 factory bolts.
  • Stock mounting location keeps center of gravity low.
  • Accepts the stock Jeep fuel pump/sensor.
  • Proprietary sump to trap gas at the fuel pick up
  • 1/8" thick Aluminum alloy tank is TIG welded.
  • Foam liner between tank & skid plate.
  • Includes a 3/16" thick heavy duty steel skid plate.
  • Assembled with stainless steel straps.
  • CNC Machined fittings are TIG welded.
  • Includes factory Mopar roll over / vent valves.
  • Multiple internal baffles to reduce fuel movement.
  • All tanks are 100% pressure tested.
  • Patent Pending.
More Info...

Gen-Right Crawler Extreme Gas Tank CJ   $889.99
Add Multi

Gen-Right Crawler Extreme Gas Tank CJ

Gen-Right Crawler Extreme Gas Tank CJ

FEATURES:

  • Each tank is made from 1/8" thick Aluminum alloy and includes a matching heavy duty 3/16" thick skid plate.
  • Internal baffles reduce fuel movement and keep fuel near the pick up
  • 1" more ground clearance
  • 15 gallon fuel capacity (but with careful filling we got one more gallon in)
  • The CJ Crawler fuel tanks are designed to accept the factory CJ or YJ type fuel sender/module.
  • All tanks are 100% pressure tested.
  • Patent Pending.
More Info...

Gen-Right Crawler Extreme Gas Tank TJ   $989.99
Add Multi

Gen-Right Crawler Extreme Gas Tank TJ

Gen-Right Crawler Extreme Gas Tank TJ

FEATURES:

  • 1" more ground clearance than stock.
  • Improved departure angle.
  • Same as stock, 19.5 gallon fuel capacity.
  • Creates more room for BIG aftermarket axles.
  • Shape allows for 5" of rear wheelbase stretch (with Dana 44)
  • Mounts in stock tank location, with 7 factory bolts.
  • Stock mounting location keeps center of gravity low.
  • Accepts the stock Jeep fuel pump/sensor.
  • 1/8" thick Aluminum alloy tank is TIG welded.
  • Foam liner between tank & skid plate.
  • Includes a 3/16" thick heavy duty steel skid plate.
  • Assembled with stainless steel straps.
  • Includes factory Mopar roll over / vent valves.
  • Internal baffles reduce fuel movement and keep fuel near the pick up.
  • All tanks are 100% pressure tested.
  • Patent Pending.
More Info...

Gen-Right Crawler Extreme Gas Tank YJ   $989.99
Add Multi

Gen-Right Crawler Extreme Gas Tank YJ

Gen-Right Crawler Extreme Gas Tank YJ

FEATURES:

  • 1" more ground clearance than stock.
  • Improved departure angle.
  • 17 gallon fuel capacity.
  • Still works with leaf springs.
  • Creates more room for BIG aftermarket axles.
  • Shape allows for 5" of rear wheelbase stretch (with Dana 44)
  • Mounts in stock tank location, with 7 factory bolts.
  • Stock mounting location keeps center of gravity low.
  • Accepts the stock Jeep fuel pump/sensor.
  • Unique sump to trap gas at the fuel pick up.
  • 1/8" thick Aluminum alloy tank is TIG welded.
  • Foam liner between tank & skid plate.
  • Includes a 3/16" thick heavy duty steel skid plate.
  • Assembled with stainless steel straps.
  • CNC machined aluminum alloy fittings are TIG welded.
  • Includes factory Mopar roll over / vent valves.
  • Internal baffles reduce fuel movement and keep fuel near the pick up.
  • All tanks are 100% pressure tested.
  • Patent Pending.
More Info...

Gen-Right Crawler Skid Plate CJ   $339.99
Add Multi

Gen-Right Crawler Skid Plate CJ

Gen-Right Crawler Skid Plate CJ

More Info...

Gen-Right Crawler Skid Plate TJ-LJ   $351.99
Add Multi

Gen-Right Crawler Skid Plate TJ-LJ

Gen-Right Crawler Skid Plate TJ-LJ

More Info...

Gen-Right Crawler Skid Plate YJ   $339.99
Add Multi

Gen-Right Crawler Skid Plate YJ

Gen-Right Crawler Skid Plate YJ

More Info...

Gen-Right Hi-Fender Tube Fenders TJ LJ Wrangler 4in Flare   $599.99

Gen-Right Hi-Fender Tube Fenders TJ LJ Wrangler 4in Flare

Gen-Right Hi-Fender Tube Fenders TJ LJ Wrangler 4in Flare

FEATURES:

  • Built from rugged 1-1/2" diameter x .120" wall tubing.
  • NEW - Aluminum inner fenders are now available still requires the TFF2500 re-location kit.
  • MIG Welded in a precision jig to assure a good fit.
  • Bigger wheel opening (up and back)
  • Re-uses original inner fender well (requires the TFF2500 inner fender relocation kit).
  • 4" Flare width on this model.
  • Can be used with your existing factory hood, cut down (with instructions provided with GenRight fenders).
  • Now includes perforated side panels (to remove unwanted under hood heat).
  • Also available in Standard Fender version TFF2700
  • Also available in a 0" flare TFF2620 and 6" flare Hi Fender versions.
  • Also available in a light weight Aluminum version TFF2720
  • Also available in a light weight Aluminum Hi-Fender versionTFF2730
  • Will also work with AEV Hi Line hoods.
  • Inner fender mounting kit TFF2500 sold separately.
  • 100% Made in the USA
More Info...

Gen-Right Hood Louver 3 Piece Long Black Set   $88.99
Add Multi

Gen-Right Hood Louver 3 Piece Long Black Set

Gen-Right Hood Louver 3 Piece Long Black Set

This is the Gen-Right Off Road 3pc "long" hood louver set.

Works great on Jeep TJ, LJ or YJ.

They can be mounted in many different positions on the hood and are sold as a 3 piece set.

This 3pc kit is: (1) Front louver has louvers in traditional direction and (2) long back louvers.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

Dimensions: Front louver 22" x 3-3/4" & Rear louvers 15-1/2" x 4

More Info...

Gen-Right Hood Louver 5 Piece Set Black   $141.99
Add Multi

Gen-Right Hood Louver 5 Piece Set Black

Gen-Right Hood Louver 5 Piece Set Black

This is the Gen-Right Off Road 5 piece hood louver set for a Jeep TJ/LJ or YJ.

This configuration offers maximum cooling for your engine compartment!

The louvers can be mounted in many different positions on the hood and (this part number) is sold in 5 piece set with a black powder coated finish.

This 5pc kit is: (1) Front louver with louvers in traditional direction, (2) short back louvers and (2) long back louvers.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

Dimensions: Front louver 22" x 3-3/4", Long louvers 15-1/2" x 4", Short louvers 7-3/4" x 8".

More Info...

Gen-Right Hood Louver Long Black Set   $66.99
Add Multi

Gen-Right Hood Louver Long Black Set

Gen-Right Hood Louver Long Black Set

Technical Details

  • Hood Louver Set
  • Black
  • Long
  • 2 Pc.
  • Measures 15-1/2 L x 4 W inches
More Info...

Gen-Right Hood Louver Short 3 Piece Black Set   $88.99
Add Multi

Gen-Right Hood Louver Short 3 Piece Black Set

Gen-Right Hood Louver Short 3 Piece Black Set

This is the Gen-Right Off Road 3pc "short" hood louver set.

Works great on Jeep TJ, LJ or YJ. They can be mounted in many different positions on the hood and are sold as a 3 piece set.

This 3pc kit is: (1) Front louver and (2) short back louvers with color matched rivets.

Each louver is stamped from .080" thick high quality aircraft grade aluminum alloy which can be riveted or bolted to the top side of your vehicles hood. In addition to venting that unwanted under hood heat they look great too! Includes color matched pop rivets & installation instructions.

Dimensions: Front louver 22" x 3-3/4" & Rear louvers 7-3/4" x 8

More Info...

Gen-Right Hood Louver Short Black Set   $66.99
Add Multi

Gen-Right Hood Louver Short Black Set

Gen-Right Hood Louver Short Black Set

Technical Details

  • Black
  • 2-piece set
  • Dimensions: 7-3/4" long x 8" wide
  • Stamped from .080 thick high quality aircraft grade aluminum alloy
  • Eliminates unwanted under hood heat
More Info...

Gen-Right JK Steel Front Bumper with Trail Series Stinger   $835.95

Gen-Right JK Steel Front Bumper with Trail Series Stinger

Gen-Right JK Steel Front Bumper with Trail Series Stinger 

More Info...

Gen-Right LJ Corner Guard Set Full Std   $549.99
Add Multi

Gen-Right LJ Corner Guard Set Full Std

Gen-Right LJ Corner Guard Set Full Std

FEATURES:

  • Wheel opening shape is the same as stock to fit the standard fender flares or the GenRight metal tube flares, to remain street legal.
  • Made of SOLID 3/16" thick plate steel.
  • Each set has holes for the OE tail lights, hinges and gas filler.
  • Our corner guards are pre-drilled and use at least 2 more mounting bolts than other brands to secure the corner to the tub.
  • We use all 5/16" countersunk Stainless Steel bolts (flush type) to securely mount our corners to protect your Jeeps tub.
  • Retains OEM tail light mounting holes which are perfect for our LED tail lights!NOTE:a) Drilling required to mount rear flares.
More Info...

Gen-Right Rocker Guard Backing Plates   $37.99
Add Multi

Gen-Right Rocker Guard Backing Plates

Gen-Right Rocker Guard Backing Plates

This is a great upgrade for the Gen-Right rocker guards (aka: rock sliders).

These brackets are laser cut and formed from 3/16" thick steel for strength. They are pre-drilled and are designed to mount on the inside of your Jeep's tub (just inside the door) using the same bolts that mount on any model Gen-Right rocker guards.

This formed piece of metal will add strength in an area that always gets hit or help those who have already damaged the mounting area to pull body panels flat up against the rockers so there are no gaps between the rocker guard and body.

These brackets can be cut shorter or drilled to fit other brands of rockers too!

Sold in pairs, un-painted.

More Info...


Displaying 1 to 50 (of 156 products)

We Accept

357459867 requests since
Thursday 13 May, 2010

Social Networking

  • Follow us on Twitter
  • Find us on Facebook
  • RSS Feed
  • Videos on You Tube

Subscribe Newsletter

Subscribe to our Newsletter to get Latest News & Updates about our Services.


Contact Info

4x4 GroupBuy.com
8 Turning Leaf Drive
Unit 1
Windham, ME 04062
207-689-3191
Pit Bull